MC74VHCT373ADWRG
| Parameters | |
|---|---|
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
MC74VHCT373ADWRG Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. This package has the format of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. In the 74VHCT series, this FPGA is located. The design of this electronic part is based on 8 bits. A device with this design has 20 terminations. There is no doubt that it belongs to the family 74VHCT373. In order to operate it, the supply voltage must be 5V. The device is equipped with 20 pins. It is a member of the AHCT/VHCT family of electronic devices. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. There is 5V power supply for it. The device's reliable performance makes it a good choice for TAPE AND REEL. High efficiency requires maintaining the supply voltage at 5V. 3 output lines generate the binary equivalent of the input lines. There are no external factors that affect it, so it consumes 4μA quiescent current. It achieves superior flexibility by using 8 circuits.
MC74VHCT373ADWRG Features
20-SOIC (0.295, 7.50mm Width) package
74VHCT series
8 Bits
74VHCT373 family
20 pin count
20 pins
5V power supplies
MC74VHCT373ADWRG Applications
There are a lot of ON Semiconductor MC74VHCT373ADWRG Latches applications.
- Watches
- Shift left with parallel loading
- Stacked or Push-Down Registers
- Ring counter
- Decade counting 7-segment decimal display
- Shift right with parallel loading
- Automatic test equipment
- Bus system register with enable parallel lines at bus side
- Parallel Input
- Counter timers
