MC74VHCT374ADWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74VHCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHCT374 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHCT374ADWR2 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74VHCTseries of FPGAs. Its output frequency should not exceed 130MHz Hz. D latch consists of 1 elements. There is a consumption of 4μAof quiescent energy. Terminations are 20. This D latch belongs to the family of 74VHCT374. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 4pF farads. Electronic devices of this type belong to the AHCT/VHCTfamily. It is mounted in the way of Surface Mount. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. It is designed with 8bits. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The superior flexibility of this product is achieved by using 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 5V power supplies attached to it. The flip flop contains 2ports. In order to operate, the chip has 3 output lines.
MC74VHCT374ADWR2 Features
Tape & Reel (TR) package
74VHCT series
8 Bits
5V power supplies
MC74VHCT374ADWR2 Applications
There are a lot of ON Semiconductor MC74VHCT374ADWR2 Flip Flops applications.
- Dynamic threshold performance
- Event Detectors
- Patented noise
- Common Clocks
- Computers
- Data Synchronizers
- Synchronous counter
- Asynchronous counter
- Computing
- ESD protection
