MC74VHCT374ADWRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHCT374ADWRG Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74VHCTseries of FPGAs. You should not exceed 130MHzin its output frequency. In total, there are 1 elements. There is 4μA quiescent consumption. Terminations are 20. This D latch belongs to the family of 74VHCT374. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 4pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCTfamily of devices. Electronic part Surface Mountis mounted in the way. A total of 20pins are provided on this board. Its clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 8 Bits. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 5V power supplies attached to it. A total of 2ports are embedded in the D flip flop. The supply voltage should be maintained at 5V for high efficiency. It operates with 3 output lines.
MC74VHCT374ADWRG Features
Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies
MC74VHCT374ADWRG Applications
There are a lot of ON Semiconductor MC74VHCT374ADWRG Flip Flops applications.
- Single Down Count-Control Line
- Pattern generators
- ATE
- Frequency Divider circuits
- Divide a clock signal by 2 or 4
- Shift registers
- Storage registers
- Circuit Design
- Automotive
- ESD protection
