MC74VHCT374AMEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 130MHz |
| Family | AHCT/VHCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | ROHS3 Compliant |
MC74VHCT374AMEL Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. This type of FPGA is a part of the 74VHCT series. This D flip flop should not have a frequency greater than 130MHz. D latch consists of 1 elements. This process consumes 4μA quiescents. Terminations are 20. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 4pF farads at the input. This D flip flop belongs to the family of AHCT/VHCT. Vsup reaches its maximum value at 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. There are 2 ports embedded in the flip flops.
MC74VHCT374AMEL Features
Tape & Reel (TR) package
74VHCT series
MC74VHCT374AMEL Applications
There are a lot of Rochester Electronics, LLC MC74VHCT374AMEL Flip Flops applications.
- Safety Clamp
- Common Clocks
- Supports Live Insertion
- Event Detectors
- Parallel data storage
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch
- Instrumentation
- Single Up Count-Control Line
- Dynamic threshold performance
