Parameters |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2009 |
Series |
74VHCT |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
FF/Latches |
Packing Method |
RAIL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74VHCT573 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.5 ns |
Turn On Delay Time |
5.1 ns |
Family |
AHCT/VHCT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
MC74VHCT573ADW Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. A package of Tube has been used. There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74VHCT family. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. It belongs to 74VHCT573 family. It operates with a supply voltage of 5V. There are 20 pins attached to it. It is a member of the AHCT/VHCT family of electronic devices. Surface Mount is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. Vsup reaches 5.5V as the maximum supply voltage. There are 5V power supplies required for this machine to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. The reliability of this device makes it well suited to RAIL. A binary equivalent of the input line is generated by the 3 output lines. 8 circuits are used to provide this superior level of flexibility.
MC74VHCT573ADW Features
20-SOIC (0.295, 7.50mm Width) package
74VHCT series
8 Bits
74VHCT573 family
20 pin count
5V power supplies
MC74VHCT573ADW Applications
There are a lot of ON Semiconductor MC74VHCT573ADW Latches applications.
- Automotive Body Electronics
- Accumulator Registers
- Counter
- Parallel data storage
- Communication systems
- Serial Output Data Queuing
- High-speed logic
- Relay
- Frequency
- Storage