Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
74VHCT |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74VHCT573 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.5 ns |
Turn On Delay Time |
5.1 ns |
Family |
AHCT/VHCT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74VHCT573ADWR2 Overview
20-SOIC (0.295, 7.50mm Width) contains it. A package of Tape & Reel (TR) has been used. Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74VHCT series. Electronic parts with 8 bits are designed for this application. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74VHCT573. It operates with a supply voltage of 5V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of AHCT/VHCT. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 5V power supplies are required for it to operate. A voltage greater than 4.5V must be supplied as a power supply (Vsup). Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Input lines are converted into binary equivalents by 3 output lines. To achieve its exceptional flexibility, it relies on 8 circuits.
MC74VHCT573ADWR2 Features
20-SOIC (0.295, 7.50mm Width) package
74VHCT series
8 Bits
74VHCT573 family
20 pin count
5V power supplies
MC74VHCT573ADWR2 Applications
There are a lot of ON Semiconductor MC74VHCT573ADWR2 Latches applications.
- Data acquisition
- Display driver
- General-Purpose Register
- Multistage ripple counting
- Bus system register with enable parallel lines at bus side
- Up-Down Johnson
- Frequency
- Network Switches
- BCD counting
- Hammer Device Information