Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
74VHCT |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Terminal Finish |
Tin (Sn) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74VHCT573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.5 ns |
Turn On Delay Time |
5.1 ns |
Family |
AHCT/VHCT |
Logic Function |
D-Type, Latch |
Halogen Free |
Halogen Free |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74VHCT573ADWRG Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. The package is in the form of Tape & Reel (TR). It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. The voltage supply is 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. 74VHCT is the series number of this FPGA. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74VHCT573 family. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. It is part of the family of electronic devices called AHCT/VHCT. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. 5V power supplies are needed to operate it. An electronic circuit can be found on 8 input lines. Its reliable performance makes it an excellent choice for TAPE AND REEL. For maximum efficiency, the supply voltage should be set to 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MC74VHCT573ADWRG Features
20-SOIC (0.295, 7.50mm Width) package
74VHCT series
8 Bits
74VHCT573 family
20 pin count
20 pins
5V power supplies
MC74VHCT573ADWRG Applications
There are a lot of ON Semiconductor MC74VHCT573ADWRG Latches applications.
- Address register
- Double bus register system
- Meter applications
- Counting
- Synchronous frequency dividers
- Flip-flops
- Digital bus buffer
- High-speed logic
- Decade counting 7-segment decimal display
- Automotive HEV/EV Powertrain