MC74VHCT574ADWG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74VHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
MC74VHCT574ADWG Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74VHCTseries of FPGAs. It should not exceed 130MHzin terms of its output frequency. D latch consists of 1 elements. There is 4μA quiescent consumption. 20terminations have occurred. It is a member of the 74VHCT574 family. A voltage of 5V provides power to the D latch. A JK flip flop with a 4pFfarad input capacitance is used here. This D flip flop belongs to the family of AHCT/VHCT. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. 8bits are used in its design. Considering its reliability, this T flip flop is well suited for RAIL. The system runs on a power supply of 5V watts. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be set to 5V. There are 3 output lines in this JK flip flop. Currently, there are 8 channels available.
MC74VHCT574ADWG Features
Tube package
74VHCT series
20 pins
8 Bits
5V power supplies
MC74VHCT574ADWG Applications
There are a lot of ON Semiconductor MC74VHCT574ADWG Flip Flops applications.
- Single Up Count-Control Line
- Differential Individual
- Event Detectors
- ATE
- Cold spare funcion
- EMI reduction circuitry
- Set-reset capability
- Circuit Design
- Communications
- Individual Asynchronous Resets
