MC74VHCT74ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 8μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHCT74ADR2G Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). In the configuration, Differentialis used as the output. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. -55°C~125°C TAis the operating temperature. The type of this D latch is D-Type. The 74VHCTseries comprises this type of FPGA. Its output frequency should not exceed 140MHz. This process consumes 2μA quiescents. A total of 14terminations have been recorded. Members of the 74VHCT74family make up this object. It is powered from a supply voltage of 5V. A 4pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of AHCT/VHCT/VT. It is mounted in the way of Surface Mount. This board has 14 pins. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It runs on 5Vvolts of power. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The 8mA output current allows it to be designed with the greatest amount of flexibility. In order to operate, the chip has 1 output lines. It is reported that there are 2 channels.
MC74VHCT74ADR2G Features
Tape & Reel (TR) package
74VHCT series
14 pins
5V power supplies
MC74VHCT74ADR2G Applications
There are a lot of ON Semiconductor MC74VHCT74ADR2G Flip Flops applications.
- Frequency Dividers
- Power down protection
- CMOS Process
- Automotive
- 2 – Bit synchronous counter
- ESD performance
- Frequency Divider circuits
- Storage Registers
- Bus hold
- Count Modes
