MC74VHCT74ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHCT74ADTR2 Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. -55°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74VHCT series. Its output frequency should not exceed 140MHz. It consumes 2μA of quiescent current without being affected by external factors. 14terminations have occurred. If you search by 74VHCT74, you will find similar parts. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4pF farads. A device of this type belongs to the family of AHCT/VHCT/VT. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. Due to its superior flexibility, it uses 2 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It operates from 5V power supplies. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. There are no output lines on the JK flip flop.
MC74VHCT74ADTR2 Features
Tape & Reel (TR) package
74VHCT series
14 pins
5V power supplies
MC74VHCT74ADTR2 Applications
There are a lot of ON Semiconductor MC74VHCT74ADTR2 Flip Flops applications.
- Data transfer
- Balanced Propagation Delays
- ESCC
- Memory
- Matched Rise and Fall
- ATE
- Safety Clamp
- ESD protection
- Common Clocks
- Patented noise
