Parameters | |
---|---|
Factory Lead Time | 1 Week |
Mounting Type | Surface Mount |
Package / Case | 44-LQFP |
Surface Mount | YES |
Operating Temperature | -40°C~85°C TA |
Packaging | Tray |
Published | 2006 |
Series | S08 |
JESD-609 Code | e3 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 44 |
ECCN Code | 3A991.A.2 |
Terminal Finish | Matte Tin (Sn) |
Additional Feature | OPERATES AT 2.4V TO 2.1V SUPPLY AT 40 MHZ, 2.1V TO 1.8V SUPPLY AT 20 MHZ |
HTS Code | 8542.31.00.01 |
Subcategory | Microcontrollers |
Technology | CMOS |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 3V |
Terminal Pitch | 0.8mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | MC9S08QE32 |
JESD-30 Code | S-PQFP-G44 |
Qualification Status | Not Qualified |
Supply Voltage-Max (Vsup) | 3.6V |
Power Supplies | 1.8/3.6V |
Supply Voltage-Min (Vsup) | 1.8V |
Oscillator Type | Internal |
Number of I/O | 34 |
Speed | 50MHz |
RAM Size | 2K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
Peripherals | LVD, PWM, WDT |
Clock Frequency | 16MHz |
Program Memory Type | FLASH |
Core Size | 8-Bit |
Program Memory Size | 32KB 32K x 8 |
Connectivity | I2C, LINbus, SCI, SPI |
Bit Size | 8 |
Data Converter | A/D 10x12b |
Has ADC | YES |
DMA Channels | NO |
PWM Channels | YES |
DAC Channels | NO |
ROM (words) | 32768 |
Height Seated (Max) | 1.6mm |
Length | 10mm |
Width | 10mm |
RoHS Status | ROHS3 Compliant |
The 8-bit microcontroller architecture is simpler and has an easy to understand programming model. It usually needs just a single supply. Despite marketing claims to the contrary, modern 8-bit architectures are lower power compared to 32-bit because the innards toggle fewer bus signals.
? 8-Bit HCS08 Central Processor Unit (CPU)
– Up to 50.33 MHz HCS08 CPU at 3.6 V to 2.4 V, 40 MHz CPU at 2.4
V to 2.1 V and 20 MHz CPU at 2.1 V to 1.8 V across temperature
range of –40 °C to 85 °C
– HC08 instruction set with added BGND instruction
– Support for up to 32 interrupt/reset sources
? On-Chip Memory
– Flash read/program/erase over full operating voltage and
temperature
– Random-access memory (RAM)
– Security circuitry to prevent unauthorized access to RAM and flash
contents
? Power-Saving Modes
– Two very low power stop modes
– Reduced power wait mode
– Peripheral clock enable register can disable clocks to unused
modules, thereby reducing currents; allows clocks to remain enabled
to specific peripherals in stop3 mode.
– Very low power external oscillator that can be used in run, wait, and
stop modes to provide accurate clock source to real time counter.
– 6 ms typical wakeup time from stop3 mode
? Clock Source Options
– Oscillator (XOSCVLP) — Loop-control Pierce oscillator; crystal or
ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16
MHz
– Internal clock source (ICS) — Internal clock source module
containing a frequency-locked-loop (FLL) controlled by internal or
external reference; precision trimming of internal reference allows
0.2% resolution and 2% deviation over temperature and voltage;
supports CPU frequencies from
4 kHz to 50.33 MHz.
? System Protection
– Watchdog computer operating properly (COP) reset with option to
run from dedicated 1 kHz internal clock source or bus clock.
– Low-voltage warning with interrupt.
– Low-voltage detection with reset or interrupt
– Selectable trip points.
– Illegal opcode detection with reset
– Illegal address detection with reset
– Flash block protection
? Development Support
– Single-wire background debug interface
– Breakpoint capability to allow single breakpoint setting during
in-circuit debugging (plus three breakpoints in on-chip debug
module)
Typical applications are consumer, home, office and industrial products.