MCIMX233CJM4B
| Parameters | |
|---|---|
| Package / Case | 169-LFBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | i.MX23 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Base Part Number | MCIMX233 |
| Speed | 454MHz |
| Core Processor | ARM926EJ-S |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Co-Processors/DSP | Data; DCP |
| Security Features | Cryptography, Hardware ID |
| Display & Interface Controllers | LCD, Touchscreen |
| RoHS Status | ROHS3 Compliant |
MCIMX233CJM4B Description
The i.MX23 is an applications processor targeted at devices that require low power, high performance, high integration and quality audio and video playback.
MCIMX233CJM4B Features
ARM926 CPU Running at 454 MHz
Integrated ARM926EJ-S CPU
16-Kbyte data cache and 16-Kbyte instruction cache
ARM Embedded Trace Macrocell (ETM CoreSight 9) (169BGA only)
One-wire JTAG interface
Resistor -less boot mode selection using integrated OTP values
32 Kbytes of Integrated Low-Power On-Chip RAM
64 Kbytes of Integrated Mask-Programmable On-Chip ROM
1 Kbit of On-Chip One-Time-Programmable (OCOTP) ROM
Universal Serial Bus (USB) High-Speed (Up to 480 Mb/s)。Full-Speed (Up to 12 Mb/s)
-Full-speed/ high-speed USB device and host functions
Fully integrated full-speed high-speed Physical Layer Protocol (PHY)
-Mass storage host-capable (uncertified by USB-IF)
Power Management Unit
-Single inductor DC-DC switched converter with multi-channel output supporting Li-Ion
batteries.
-Features multi-channel outputs for VDDIO(3.3 V)。VDDD(1.2 V). VDDA(1.8 V). VDDM
(2.5V) and regulated 4.2V source.
Direct power from 5-V source (USB, wall power, or other sources), with programmable current
limits for load and battery charge circuits.
