MCIMX251AJM4AR2
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX251 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Power Supplies | 1.2/1.51.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection |
| Display & Interface Controllers | Keypad |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | i.MX25 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
MCIMX251AJM4AR2 Overview
Since the microprocessor is packed in 400-LFBGA, shipping overseas is convenient. A high level of reliability is provided by using an advanced packaging method Tape & Reel (TR). There are 1 Core 32-Bit cores/bus width on the CPU. K-40°C~85°C TAw what the operating temperature is around -40°C~85°C TA. A i.MX25 series item. The CPU is powered by a ARM926EJ-S core. The CPU contains LPDDR, DDR, DDR2 RAM controllers. To serve better this microprocessor features CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces. 2.0V 2.5V 2.7V 3.0V 3.3V is the I/O speed of this CPU. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. You can search for variants of a microprocessor with MCIMX251. Overall, there are 400 terminations. Turn on the cpu microprocessor and let it run with a 1.45V voltage supply. This microprocessor has an architecture of 32 bits. There is a maximum supply current of 1.52V in this microprocessor. An example of a Microprocessors microprocessor can be found here. There is a clock frequency of 24MHz on the microprocessor. According to the datasheet, the embedded microprocessor requires 1.2/1.51.8/3.3V power supply.
MCIMX251AJM4AR2 Features
ARM926EJ-S Core
32-Bit Structure
MCIMX251AJM4AR2 Applications
There are a lot of NXP USA Inc. MCIMX251AJM4AR2 Microprocessor applications.
- Radio
- Switches
- Copiers
- Missile control
- Light sensing & controlling devices
- Electrocardiogram (EKG)
- Temperature sensing and controlling devices
- Paper shredders
- Walkie talkies
- Home appliances
