Parameters |
Package / Case |
400-LFBGA |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Published |
2013 |
Series |
i.MX25 |
JESD-609 Code |
e1 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
400 |
ECCN Code |
5A992 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
HTS Code |
8542.31.00.01 |
Subcategory |
Microprocessors |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
1.45V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCIMX255 |
JESD-30 Code |
S-PBGA-B400 |
Supply Voltage-Max (Vsup) |
1.52V |
Power Supplies |
1.2/1.51.8/3.3V |
Supply Voltage-Min (Vsup) |
1.38V |
Speed |
400MHz |
uPs/uCs/Peripheral ICs Type |
MICROPROCESSOR |
Core Processor |
ARM926EJ-S |
Clock Frequency |
24MHz |
Address Bus Width |
26 |
Boundary Scan |
YES |
Low Power Mode |
YES |
Format |
FIXED POINT |
Integrated Cache |
YES |
Voltage - I/O |
2.0V 2.5V 2.7V 3.0V 3.3V |
Ethernet |
10/100Mbps (1) |
Number of Cores/Bus Width |
1 Core 32-Bit |
Graphics Acceleration |
No |
RAM Controllers |
LPDDR, DDR, DDR2 |
USB |
USB 2.0 + PHY (2) |
Additional Interfaces |
CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
Security Features |
Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection |
Display & Interface Controllers |
Keypad, LCD, Touchscreen |
Height Seated (Max) |
1.6mm |
Length |
17mm |
RoHS Status |
ROHS3 Compliant |
MCIMX255AJM4 Overview
The microprocessor is conveniently packaged in 400-LFBGA, making it easy to ship internationally. A high level of reliability is provided by using an advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. The operating temperature around -40°C~85°C TA should be understood. The cpu microprocessor belongs to the i.MX25 series. Core-wise, this CPU has a ARM926EJ-S processor. The CPU uses LPDDR, DDR, DDR2 RAM controllers. Featuring CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces, this microprocessor can better serve you. 2.0V 2.5V 2.7V 3.0V 3.3V is the CPU's I/O address. It is a MICROPROCESSOR in terms of uPs/uCs/Peripheral ICs. You can search for variants of a microprocessor with MCIMX255. Overall, there are 400 terminations. The microprocessor should be turned on and run with a voltage supply of 1.45V volts. Supply current is maximum at 1.52V. A typical Microprocessors embedded microprocessor. There is a clock frequency of 24MHz on the microprocessor. According to datasheets, the micro processor requires 1.2/1.51.8/3.3V power sources.
MCIMX255AJM4 Features
ARM926EJ-S Core
MCIMX255AJM4 Applications
There are a lot of NXP USA Inc. MCIMX255AJM4 Microprocessor applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Smart instruments
- Xbox
- Set-top boxes
- Industrial instrumentation devices
- Removable disks
- Equipment control
- Petrochemical
- Leakage current tester
- Data acquisition and control