MCIMX255AJM4AR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | i.MX25 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX255 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Power Supplies | 1.2/1.51.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection |
| Display & Interface Controllers | Keypad, LCD, Touchscreen |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
MCIMX255AJM4AR2 Overview
The microprocessor is convenient for international shipping since it is packaged in 400-LFBGA. Using advanced packaging techniques Tape & Reel (TR), high reliability is ensured. Cores/Bus width of the CPU is 1 Core 32-Bit . K-40°C~85°C TAw what the operating temperature is around -40°C~85°C TA. This is part of the i.MX25 series. ARM926EJ-S processors are embedded in this CPU. A CPU with this architecture uses LPDDR, DDR, DDR2 RAM controllers. Featuring CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces, this microprocessor can better serve you. There is 2.0V 2.5V 2.7V 3.0V 3.3V I/O running on this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR. Use MCIMX255 when searching for variants of the embedded microprocessor. The total number of terminations is 400. Using a 1.45V voltage supply, the microprocessor should turn on and run. The maximum supply current is 1.52V. The embedded microprocessor is a typical Microprocessors. CPU microprocessors with a clock frequency of 24MHz are used. It is specified in the datasheet that this micro processor requires 1.2/1.51.8/3.3V power supplies.
MCIMX255AJM4AR2 Features
ARM926EJ-S Core
MCIMX255AJM4AR2 Applications
There are a lot of NXP USA Inc. MCIMX255AJM4AR2 Microprocessor applications.
- Switches
- Consumer electronics products
- Keyboards
- Toasters
- Instrument control
- Missile control
- Leakage current tester
- Petrochemical
- Entertainment-radios, CD players, televisions
- Dishwashers
