MCIMX257CJM4
| Parameters | |
|---|---|
| Base Part Number | MCIMX257 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Power Supplies | 1.2/1.51.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Number of I/O | 6 |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| RAM (words) | 128000 |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Bus Compatibility | I2C; USB |
| Display & Interface Controllers | Keypad, LCD, Touchscreen |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | i.MX25 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper - with Nickel barrier |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
MCIMX257CJM4 Description
The i.MX25 multimedia applications processor has the right mix of high performance, low power, and integration to support the growing needs of the industrial and general embedded markets.
MCIMX257CJM4 Features
Advanced power management—The heart of the device is a level of power management
throughout the IC that enables the multimedia features and peripherals to achieve minimum system
power consumption in active and various low-power modes. Power management techniques allow
the designer to deliver a feature-rich product that requires levels of power far lower than typical
industry expectations.
Multimedia powerhouse—The multimedia performance of the i.MX25 processor is boosted by a
16 KB L1 instruction and data cache system and further enhanced by an LCD controller (with
alpha blending), a CMOS image sensor interface, an A/D controller (integrated touchscreen
controller), and a programmable Smart DMA (SDMA) controller.
128 Kbytes on-chip SRAM—The additional 128 Kbyte on-chip SRAM makes the device ideal for
eliminating external RAM in applications with a small footprint RTOS. The on-chip SRAM allows
the designer to enable an ultra-low power LCD refresh.
Interface flexibility—The device interface supports connection to all common types of external
memories: MobileDDR, DDR, DDR2, NOR Flash, PSRAM, SDRAM and SRAM, NAND Flash,
and managed NAND.
Increased security—Because the need for advanced security for tethered and untethered devices
continues to increase, the i.MX25 processor delivers hardware-enabled security features that
enable secure e-commerce, Digital Rights Management (DRM), information encryption, robust
tamper detection, secure boot, and secure software downloads.
On-chip PHY—The device includes an HS USB OTG PHY and FS USB HOST PHY.
Fast Ethernet—For rapid external communication, a Fast Ethernet Controller (FEC) is included.
i.MX25 only supports Little Endian mode.
MCIMX257CJM4 Applications
Graphical remote controls
Human Machine Interface (HMI)
Residential and commercial control panels
Residential gateway (smart metering)
Handheld scanners and printers
Electronic point-of-sale terminals
Patient-monitoring devices
