MCIMX27LMOP4AR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 473-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | i.MX27 |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 473 |
| ECCN Code | 5A992.C |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX27 |
| JESD-30 Code | S-PBGA-B473 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 26MHz |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | DDR |
| USB | USB 2.0 + PHY (3) |
| Additional Interfaces | 1-Wire, AC97, I2C, I2S, IDE, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Security; SAHARAH2 |
| Security Features | Cryptography, Random Number Generator, RTIC, Secure Fusebox, Secure Memory |
| Display & Interface Controllers | Keypad, LCD |
| Height Seated (Max) | 1.54mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
MCIMX27LMOP4AR2 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 473-LFBGA. The packaging method Tape & Reel (TR) provides high reliability. CPUs have 1 Core 32-Bit cores/bus width. Be aware of the operating temperature around -40°C~85°C TA. A i.MX27 series item. The CPU is cored with a ARM926EJ-S processor. A total of DDR RAM controllers are used by this CPU. The microprocessor features interfaces 1-Wire, AC97, I2C, I2S, IDE, MMC/SD, SPI, SSI, UART for better service. 2.0V 2.5V 2.7V 3.0V is the CPU's I/O address. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. Use MCIMX27 when searching for variants of the embedded microprocessor. Overall, there are 473 terminations. When the voltage supply is 1.45V, the cpu microprocessor should be powered on and run. 32-Bit is its architecture. A maximum supply current of 1.52V is available. An external data bus width of 16 is available on this CPU. In this CPU microprocessor, the clock frequency is 0 Hz.
MCIMX27LMOP4AR2 Features
ARM926EJ-S Core
32-Bit Structure
MCIMX27LMOP4AR2 Applications
There are a lot of NXP USA Inc. MCIMX27LMOP4AR2 Microprocessor applications.
- Smoke alarms
- Measuring revolving objects
- Communication-bluetooth, Wi-Fi, radio
- DCS control intelligent sensor
- Mice
- Set-top boxes
- Digital cameras
- Removable disks
- Television
- Toasters
