MCIMX27MJP4AR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 473-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | i.MX27 |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 473 |
| ECCN Code | 5A992.C |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX27 |
| JESD-30 Code | S-PBGA-B473 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 32MHz |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | DDR |
| USB | USB 2.0 + PHY (3) |
| Additional Interfaces | 1-Wire, AC97, I2C, I2S, IDE, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Security; SAHARAH2 |
| Security Features | Cryptography, Random Number Generator, RTIC, Secure Fusebox, Secure Memory |
| Display & Interface Controllers | Keypad, LCD |
| Height Seated (Max) | 1.54mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
MCIMX27MJP4AR2 Overview
Due to its 473-LFBGA packaging, it is convenient to ship overseas. High reliability is achieved with advanced packaging method Tape & Reel (TR). A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Understand how the operating temperature around -40°C~85°C TA is determined. This is a member of the i.MX27 series. This CPU is cored with a ARM926EJ-S processor. It has DDR RAM controllers. Featuring 1-Wire, AC97, I2C, I2S, IDE, MMC/SD, SPI, SSI, UART interfaces, this microprocessor can better serve you. As far as I/O is concerned, this CPU runs at 2.0V 2.5V 2.7V 3.0V. There is MICROPROCESSOR MICROPROCESSOR in the uPs, uCs, or peripheral ICs categories. Use MCIMX27 when searching for variants of the embedded microprocessor. There are 473 terminations totally. Using a 1.45V voltage supply, the microprocessor should turn on and run. The architecture of the microprocessor is 32-bit. There is a maximum supply current of 1.52V in this microprocessor. There is a wide width of 32 on the external data bus of this CPU. In this CPU microprocessor, the clock frequency is 0 Hz.
MCIMX27MJP4AR2 Features
ARM926EJ-S Core
32-Bit Structure
MCIMX27MJP4AR2 Applications
There are a lot of NXP USA Inc. MCIMX27MJP4AR2 Microprocessor applications.
- Consumer electronics products
- Automobile
- ECG machine
- Entertainment products
- Accu-check
- Set-top boxes
- Heart rate monitors
- Light sensing & controlling devices
- Blenders
- Electronic jamming systems
