MCIMX280CVM4B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | i.MX28 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.8mm |
| Base Part Number | MCIMX280 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.55V |
| Supply Voltage-Min (Vsup) | 1.35V |
| Speed | 454MHz |
| uPs/uCs/Peripheral ICs Type | MULTIFUNCTION PERIPHERAL |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Boundary Scan | YES |
| RAM (words) | 128000 |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LVDDR, LVDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Number of Serial I/Os | 4 |
| Co-Processors/DSP | Data; DCP |
| Bus Compatibility | CAN; ETHERNET; I2C; IRDA; SPI; UART; USB |
| Security Features | Boot Security, Cryptography, Hardware ID |
| Display & Interface Controllers | Keypad |
| Height Seated (Max) | 1.37mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
MCIMX280CVM4B Description
The MCIMX280CVM4B is a low-power, high-performance applications processor optimized for the general embedded industrial and consumer markets. The core of the MCIMX280CVM4B is NXP's fast, power-efficient implementation of the ARM926EJ-S? core, with speeds of up to 454 MHz. The integrated power management unit (PMU) on the MCIMX280CVM4B is composed of a triple output DC-DC switching converter and multiple linear regulators.
MCIMX280CVM4B Features
128 KBytes of integrated low-power on-chip SRAM
128 KBytes of integrated mask-programmable on-chip ROM
16-bit mobile DDR (mDDR) (1.8 V), DDR2 (1.8 V), and LV-DDR2 (1.5 V), up to 205 MHz DDR clock frequency with voltage overdrive
Support for up to eight NAND Flash memory devices with up to 20-bit BCH ECC
Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces
One USB2.0 OTG device/host controller and PHY
MCIMX280CVM4B Applications
Human-machine interface(HMI) panels: industrial, home
Industrial Drive, PLC, I/O control display, factory robotics display, graphical remote controls
Handheld scanners and printers
Patient-monitoring, portable medical devices
Smart energy meters, energy gateways
Media phones, media gateways
