MCIMX280CVM4BR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | i.MX28 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX280 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.55V |
| Power Supplies | 1.41.8V |
| Supply Voltage-Min (Vsup) | 1.35V |
| Speed | 454MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LVDDR, LVDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Co-Processors/DSP | Data; DCP |
| Security Features | Boot Security, Cryptography, Hardware ID |
| Display & Interface Controllers | Keypad |
| Height Seated (Max) | 1.37mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
MCIMX280CVM4BR2 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 289-LFBGA. The packaging method Tape & Reel (TR) provides high reliability. CPUs have 1 Core 32-Bit cores/bus width. Understand how the operating temperature around -40°C~85°C TA is determined. This is a member of the i.MX28 series. The CPU is cored with a ARM926EJ-S processor. There are LVDDR, LVDDR2, DDR2 RAM controllers on this CPU. This microprocessor has I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces to serve you better. This CPU runs I/O at 1.8V 3.3V. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. Using MCIMX280 will help you find variants of the cpu microprocessor. There are 289 terminations totally. It has a 32-Bit architecture. Supply current is maximum at 1.55V. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. There is a clock frequency of 24MHz on the microprocessor. The micro processor requires 1.41.8V power supplies according to the datasheets.
MCIMX280CVM4BR2 Features
ARM926EJ-S Core
32-Bit Structure
MCIMX280CVM4BR2 Applications
There are a lot of NXP USA Inc. MCIMX280CVM4BR2 Microprocessor applications.
- Security systems
- Keyboards
- Communication-bluetooth, Wi-Fi, radio
- Heart rate monitors
- Leakage current tester
- Ipod
- X-ray
- Virtual reality VR robots
- DDC control
- Agriculture, transportation field
