MCIMX283CVM4BR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | i.MX28 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX283 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.55V |
| Power Supplies | 1.41.8V |
| Supply Voltage-Min (Vsup) | 1.35V |
| Speed | 454MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LVDDR, LVDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Co-Processors/DSP | Data; DCP |
| Security Features | Boot Security, Cryptography, Hardware ID |
| Display & Interface Controllers | Keypad, LCD, Touchscreen |
| Height Seated (Max) | 1.37mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
MCIMX283CVM4BR2 Overview
Packed in 289-LFBGA, the microprocessor is convenient for shipping overseas. High reliability can be achieved by using the advanced packaging method Tape & Reel (TR). A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. The operating temperature around -40°C~85°C TA should be understood. The cpu microprocessor belongs to the i.MX28 series. Core-wise, this CPU has a ARM926EJ-S processor. A CPU with this architecture uses LVDDR, LVDDR2, DDR2 RAM controllers. This microprocessor features interfaces I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART. There is 1.8V 3.3V I/O running on this CPU. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. You can search for variants of a microprocessor with MCIMX283. In total, 289 terminations have been made. There are 32 bits in its architecture. The supply voltage should not exceed 1.55V. An example of a Microprocessors microprocessor can be found here. In this CPU microprocessor, the clock frequency is 0 Hz. It is specified in the datasheet that this micro processor requires 1.41.8V power supplies.
MCIMX283CVM4BR2 Features
ARM926EJ-S Core
32-Bit Structure
MCIMX283CVM4BR2 Applications
There are a lot of NXP USA Inc. MCIMX283CVM4BR2 Microprocessor applications.
- Electrocardiogram (EKG)
- Industrial robot
- Measurement and control field
- Industrial control field
- Blenders
- Security systems
- Dryers
- Metering & measurement field
- Dishwashers
- 8. Navigation control field
