MCIMX285AVM4B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | i.MX28 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX285 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.55V |
| Power Supplies | 1.41.8V |
| Supply Voltage-Min (Vsup) | 1.35V |
| Speed | 454MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Screening Level | AEC-Q100 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LVDDR, LVDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Co-Processors/DSP | Data; DCP |
| Security Features | Boot Security, Cryptography, Hardware ID |
| Display & Interface Controllers | Keypad, LCD, Touchscreen |
| Height Seated (Max) | 1.37mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
MCIMX285AVM4B Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 289-LFBGA. Advanced packaging method Tray is used to provide high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. Be aware of the operating temperature around -40°C~85°C TA. This is a member of the i.MX28 series. With a core count of ARM926EJ-S, this CPU is multicore. There are LVDDR, LVDDR2, DDR2 RAM controllers on this CPU. This microprocessor is equipped with an interface of CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART. As far as I/O is concerned, this CPU runs at 1.8V 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Search MCIMX285 for variants of the embedded microprocessor. Total terminations are 289. Turning on and running the embedded microprocessor with a 1.5V voltage supply should be possible. There is a 32-Bit architecture in it. It can supply a maximum current of 1.55V. This microprocessor is a typical Microprocessors. The embedded microprocessor has a clock frequency of 24MHz. The datasheet specifies that this CPU microprocessor requires 1.41.8V power supply.
MCIMX285AVM4B Features
ARM926EJ-S Core
32-Bit Structure
MCIMX285AVM4B Applications
There are a lot of NXP USA Inc. MCIMX285AVM4B Microprocessor applications.
- Fire alarms
- Binding machines
- Communication-bluetooth, Wi-Fi, radio
- Automobile
- Tape drives
- Measuring revolving objects
- Temperature sensing and controlling devices
- Sonography (Ultrasound imaging)
- Radio
- 8. Navigation control field
