MCIMX503EVM8B
| Parameters | |
|---|---|
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | i.MX50 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.225V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MCIMX503 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.275V |
| Supply Voltage-Min (Vsup) | 1.175V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM® Cortex®-A8 |
| Clock Frequency | 800MHz |
| Supply Current-Max | 628mA |
| Boundary Scan | YES |
| RAM (words) | 131072 |
| Voltage - I/O | 1.2V 1.875V 2.775V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR, LPDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | Boot Security, Cryptography, Secure JTAG |
MCIMX503EVM8B Overview
Packed in 400-LFBGA, the microprocessor is convenient for shipping overseas. High reliability is achieved with advanced packaging method Tray. CPUs have 1 Core 32-Bit cores/bus width. Identify the operating temperature around -20°C~70°C TA. From the i.MX50 series. With a core count of ARM? Cortex?-A8, this CPU is multicore. The CPU uses LPDDR, LPDDR2, DDR2 RAM controllers. This microprocessor features interfaces 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART. In this CPU, I/O is set to 1.2V 1.875V 2.775V 3.0V. It is a MICROPROCESSOR CIRCUIT in terms of uPs/uCs/Peripheral ICs. Use MCIMX503 to search for variants of the cpu microprocessor. In total, 400 terminations have been made. The microprocessor should be turned on and run with a voltage supply of 1.225V volts. It can supply a maximum current of 1.275V. A clock frequency of 800MHz is used by the CPU microprocessor. There is a maximum voltage you can supply to the CPU of 628mA.
MCIMX503EVM8B Features
ARM? Cortex?-A8 Core
MCIMX503EVM8B Applications
There are a lot of NXP USA Inc. MCIMX503EVM8B Microprocessor applications.
- Keyboards
- Telephone sets
- Oil and gas
- Industrial robot
- Smart highways (navigation, traffic control, information monitoring and car service)
- Electromechanical control
- Volt meter
- Medical instruments
- Projectors
- Calculator
