MCIMX507CVM1BR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | i.MX50 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.275V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX507 |
| JESD-30 Code | S-PBGA-B400 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.35V |
| Supply Voltage-Min (Vsup) | 1.2V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM® Cortex®-A8 |
| Clock Frequency | 1000MHz |
| Supply Current-Max | 1000mA |
| Boundary Scan | YES |
| RAM (words) | 131072 |
| Voltage - I/O | 1.2V 1.875V 2.775V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR, LPDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | Boot Security, Cryptography, Secure JTAG |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
MCIMX507CVM1BR2 Overview
With a packing size of 400-LFBGA, this embedded microprocessor is ideal for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Cores/Bus width is 1 Core 32-Bit. Identify the operating temperature around 0°C~70°C TA. In the series i.MX50, it is found. With a core count of ARM? Cortex?-A8, this CPU is multicore. It has LPDDR, LPDDR2, DDR2 RAM controllers. The microprocessor features interfaces 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART for better service. As far as I/O is concerned, this CPU runs at 1.2V 1.875V 2.775V 3.0V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR CIRCUIT. The microprocessor can be searched for with MCIMX507 if you are looking for variants. To date, there have been 400 terminations. Turning on and running the embedded microprocessor with a 1.275V voltage supply should be possible. The maximum supply current is 1.35V. A clock frequency of 1000MHz is used by the CPU microprocessor. 1000mA voltage higher than 1000mA can be supplied to the CPU.
MCIMX507CVM1BR2 Features
ARM? Cortex?-A8 Core
MCIMX507CVM1BR2 Applications
There are a lot of NXP USA Inc. MCIMX507CVM1BR2 Microprocessor applications.
- Telephone sets
- Medical instruments chromatographs
- Embedded gateways
- Playstation
- Mobile computers
- Refrigerators
- Radio
- Hard drives
- Smart instruments
- Switches
