Parameters |
Factory Lead Time |
1 Week |
Package / Case |
529-FBGA |
Surface Mount |
YES |
Operating Temperature |
-20°C~85°C TC |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
Series |
i.MX53 |
JESD-609 Code |
e2 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
529 |
ECCN Code |
5A992 |
Terminal Finish |
TIN COPPER/TIN SILVER |
HTS Code |
8542.31.00.01 |
Subcategory |
Graphics Processors |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
1.25V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCIMX535 |
JESD-30 Code |
S-PBGA-B529 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
1.4V |
Power Supplies |
0.9/1.251.3V |
Supply Voltage-Min (Vsup) |
1.2V |
Speed |
1.0GHz |
uPs/uCs/Peripheral ICs Type |
MICROPROCESSOR CIRCUIT |
Core Processor |
ARM® Cortex®-A8 |
Voltage - I/O |
1.3V 1.8V 2.775V 3.3V |
Ethernet |
10/100Mbps (1) |
Number of Cores/Bus Width |
1 Core 32-Bit |
Graphics Acceleration |
Yes |
RAM Controllers |
LPDDR2, DDR2, DDR3 |
USB |
USB 2.0 (2), USB 2.0 + PHY (2) |
Additional Interfaces |
1-Wire, AC'97, CAN, I2C, I2S, MMC/SD, SAI, SPI, SSI, UART |
Co-Processors/DSP |
Multimedia; NEON™ SIMD |
Security Features |
ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC, Tamper Detection |
Display & Interface Controllers |
Keypad, LCD |
SATA |
SATA 1.5Gbps (1) |
Height Seated (Max) |
1.85mm |
Length |
19mm |
RoHS Status |
ROHS3 Compliant |
MCIMX535DVV1CR2 Overview
The embedded microprocessor has been packed in 529-FBGA for convenient overseas shipping. High reliability is achieved with advanced packaging method Tape & Reel (TR). CPUs have 1 Core 32-Bit cores/bus width. K-20°C~85°C TCw what the operating temperature is around -20°C~85°C TC. In the i.MX53 series, it is found. A ARM? Cortex?-A8 processor is present in this CPU. LPDDR2, DDR2, DDR3 RAM controllers are used by this CPU. With its 1-Wire, AC'97, CAN, I2C, I2S, MMC/SD, SAI, SPI, SSI, UART interfaces, this microprocessor will be able to serve you better. 1.3V 1.8V 2.775V 3.3V is the CPU's I/O address. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR CIRCUIT. Use MCIMX535 to search for variants of the cpu microprocessor. To date, there have been 529 terminations. When the voltage supply is 1.25V, the cpu microprocessor should be powered on and run. It can supply a maximum current of 1.4V. The cpu microprocessor Graphics Processors is typical. In the datasheet, 0.9/1.251.3V power supplies are required for this embedded microprocessor.
MCIMX535DVV1CR2 Features
ARM? Cortex?-A8 Core
MCIMX535DVV1CR2 Applications
There are a lot of NXP USA Inc. MCIMX535DVV1CR2 Microprocessor applications.
- Consumer electronics products
- Electrocardiogram (EKG)
- Smart instruments
- Telephone sets
- Metering & measurement field
- Fax machines
- Embedded gateways
- Calculator
- Digital TVs
- Speed meter