MCIMX6D5EYM10ACR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 624-LFBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -20°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | i.MX6D |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 624 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX6 |
| JESD-30 Code | S-PBGA-B624 |
| Supply Voltage-Max (Vsup) | 1.5V |
| Supply Voltage-Min (Vsup) | 1.35V |
| Speed | 1.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM® Cortex®-A9 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 2.8V 3.3V |
| Ethernet | 10/100/1000Mbps (1) |
| Number of Cores/Bus Width | 2 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR2, LVDDR3, DDR3 |
| USB | USB 2.0 + PHY (4) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC, Tamper Detection |
| Display & Interface Controllers | Keypad, LCD |
| SATA | SATA 3Gbps (1) |
| Height Seated (Max) | 1.6mm |
| Length | 21mm |
| RoHS Status | ROHS3 Compliant |
MCIMX6D5EYM10ACR Overview
With a packing size of 624-LFBGA, FCBGA, this embedded microprocessor is ideal for international shipping. High reliability is achieved using advanced packaging method Tape & Reel (TR). There are 2 Core 32-Bit cores/bus width on the CPU. It is important to understand the operating temperature around -20°C~105°C TJ. It comes from the i.MX6D series. With a core count of ARM? Cortex?-A9, this CPU is multicore. This CPU uses LPDDR2, LVDDR3, DDR3 RAM controllers. Microprocessors with CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, UART interfaces are designed to serve users better. This CPU runs I/O at 1.8V 2.5V 2.8V 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. The microprocessor can be searched for with MCIMX6 if you are looking for variants. Overall, there are 624 terminations. The microprocessor should be turned on and run with a voltage supply of 1.4V volts. Supply current is maximum at 1.5V. An external data bus width of 64 is available on this CPU.
MCIMX6D5EYM10ACR Features
ARM? Cortex?-A9 Core
MCIMX6D5EYM10ACR Applications
There are a lot of NXP USA Inc. MCIMX6D5EYM10ACR Microprocessor applications.
- Wastewater treatment
- Leakage current tester
- Electrocardiogram (EKG)
- Industrial robot
- Missile control
- Current meter
- Information appliances (networking of household appliances)
- Routers
- Fax machines
- Industrial instrumentation devices
