MCP100-270DI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 2.55V |
| Base Part Number | MCP100 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP100-270DI/TO Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Power management is packaged in a Bulk way. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The supervisor is always powered by a 2.55V volt supply. When 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 3 pins on power management. 3 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Through Hole is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. You can always use MCP100, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 60μA can be used.
MCP100-270DI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP100-270DI/TO Applications
There are a lot of Microchip Technology MCP100-270DI/TO Voltage Supervisors applications.
- Detection of phase imbalance
- Cloud computing
- Smartphones
- Multi-voltage system
- Detection of phase loss
- Military electronics
- Leakage protection
- Sensitive sensors
- Utility meter
- Microcontroller system
