MCP100-315DI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MCP100 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP100-315DI/TO Overview
Power management is mounted through 3 terminals. Packaged in the form of a Bulk, power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. A supply voltage of 3V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Through Hole is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Through Hole mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 60μA. For similar manage ics search of the manufacturer, you can always refer to MCP100, the base PMIC number. A maximum supply temperature of 60μA can be used with this power management.
MCP100-315DI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP100-315DI/TO Applications
There are a lot of Microchip Technology MCP100-315DI/TO Voltage Supervisors applications.
- Solar power charger
- Computer applications
- Utility meter
- Consumer electronics
- DSP
- Automotive power systems
- Power distribution systems of infant care room
- Set top box
- Military electronics
- Battery-powered equipment
