MCP100-475DI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | MCP100 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.62V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP100-475DI/TO Overview
A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Bulk model. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In a 4.5V supply voltage, the power management conducts. Power management conducts at a voltage of 1. The power management is mounted by Through Hole. The power management belongs to the Power Management Circuits subcategory. It has a total of 3 pins that are attached to IC management. There are 3 pins on the supervisor. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Through Hole is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 60μA. For similar manage ics search of the manufacturer, you can always refer to MCP100, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
MCP100-475DI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP100-475DI/TO Applications
There are a lot of Microchip Technology MCP100-475DI/TO Voltage Supervisors applications.
- Household appliances
- Rechargeable batteries
- Important electronics for automotive protection
- Set top box
- Important electronics for automotive safety
- DSP
- Consumer electronics
- Stable power system
- Linux and server computing
- Telecommunications equipment
