banner_page

MCP100-485HI/TO

4.6V3 Terminals 3-Pin MCP100 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP100-485HI/TO
  • Package: TO-226-3, TO-92-3 (TO-226AA)
  • Datasheet: PDF
  • Stock: 688
  • Description: 4.6V3 Terminals 3-Pin MCP100 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Output Push-Pull, Totem Pole
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 60μA
Nominal Supply Current 60μA
Max Supply Current 60μA
Adjustable Threshold NO
Quiescent Current 45μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 4.725V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Min Reset Threshold Voltage 4.6V
Max Reset Threshold Voltage 4.85V
Threshold Voltage +4.73V
Undervoltage Threshold 4.6V
Overvoltage Threshold 4.85V
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-226-3, TO-92-3 (TO-226AA)
Number of Pins 3
Operating Temperature -40°C~85°C TA
Packaging Bulk
Published 2001
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position BOTTOM
Number of Functions 1
Supply Voltage 4.6V
Base Part Number MCP100

MCP100-485HI/TO Overview


It is mounted through 3 terminals on the power management. In terms of packaging, power management follows the Bulk model. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During operation, the power ic is supplied with a voltage of 4.6V. During operation, the power ic is supplied with a voltage of 1. Through Hole mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Through Hole. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 60μA. To find similar IC managements from the manufacturer, you can always search by MCP100. The maximum supply temperature is 60μA.

MCP100-485HI/TO Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP100-485HI/TO Applications


There are a lot of Microchip Technology MCP100-485HI/TO Voltage Supervisors applications.

  • Analog circuit
  • Electric heating appliances
  • FPGA design
  • Unattended substation automation
  • Fire equipment power monitoring system
  • Linux and server computing
  • Personal computers
  • emergency room
  • Military communications
  • Electronics installed in the vehicle

Write a review

Note: HTML is not translated!
    Bad           Good