MCP100T-270I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.55V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP100 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP100T-270I/TT Overview
There are 3 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 2.55V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 3 pins in it. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 60μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MCP100. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
MCP100T-270I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP100T-270I/TT Applications
There are a lot of Microchip Technology MCP100T-270I/TT Voltage Supervisors applications.
- Precision measurement
- Battery cars
- Detection of phase sequence
- Unattended substation automation
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- DVR
- Important electronics for automotive protection
- Medical-specific isolation transformer
- Multi-voltage system
