Parameters |
Overvoltage Threshold |
3.15V |
Height |
950μm |
Length |
2.9mm |
Width |
1.3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP100 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
60μA |
Nominal Supply Current |
60μA |
Max Supply Current |
60μA |
Adjustable Threshold |
NO |
Quiescent Current |
45μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.075V |
Number of Voltages Monitored |
1 |
Reset Timeout |
150ms Minimum |
Min Reset Threshold Voltage |
3V |
Max Reset Threshold Voltage |
3.15V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3V |
MCP100T-315I/TT Overview
This power management consists of 3 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 3 pins in it. There are 3 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. You can always use MCP100, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA.
MCP100T-315I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP100T-315I/TT Applications
There are a lot of Microchip Technology MCP100T-315I/TT Voltage Supervisors applications.
- Cloud computing
- Network equipment
- Radio
- Kitchen appliances
- External alarm
- Automotive power systems
- Stable power system
- WiFi router
- Power distribution systems of ICU
- Multi-voltage system