MCP100T-460I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.35V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP100 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 45μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.475V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.48V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.6V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP100T-460I/TT Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 4.35V-voltage supply. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 3 pins on the board. Power managment ic pin count is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 60μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MCP100, the base PMIC number. A maximum supply temperature of 60μA can be used.
MCP100T-460I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP100T-460I/TT Applications
There are a lot of Microchip Technology MCP100T-460I/TT Voltage Supervisors applications.
- emergency room
- Leakage current detection
- Unattended substation automation
- Power distribution systems of infant care room
- Functional modules
- Power communication system
- Radio
- Personal computers
- Linux and server computing
- Kitchen appliances
