MCP101-300HI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 2.85V |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MCP101-300HI/TO Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. In terms of packaging, power management follows the Bulk model. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During operation, the power ic is supplied with a voltage of 2.85V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Through Hole. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 3 pins in it. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 60μA for the power management. To find similar IC managements from the manufacturer, you can always search by MCP101. A maximum supply temperature of 60μA can be used with this power management.
MCP101-300HI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101-300HI/TO Applications
There are a lot of Microchip Technology MCP101-300HI/TO Voltage Supervisors applications.
- Satellite navigation
- Radar
- DVR
- Consumer electronics
- Military communications
- Telecommunications equipment
- Power distribution systems of CCU
- Sensitive sensors
- Battery-powered equipment
- Battery cars
