MCP101-450HI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 4.25V |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP101-450HI/TO Overview
There are 3 terminals on this power management that allow it to be mounted. Bulk-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In a 4.25V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. The power management is mounted by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Through Hole is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 60μA. A similar IC managements number of the manufacturer can always be found by using MCP101, the base power ics number. The maximum supply temperature that PMIC chip can work with is 60μA.
MCP101-450HI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101-450HI/TO Applications
There are a lot of Microchip Technology MCP101-450HI/TO Voltage Supervisors applications.
- Electric heating appliances
- Detection of phase imbalance
- Power distribution systems of operating room
- Data storage applications
- Precision measurement
- Network equipment
- Electrical fire monitoring system
- Household appliances
- Analog circuit
- Radio
