MCP101-460HI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 4.35V |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.475V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.48V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.6V |
| RoHS Status | Non-RoHS Compliant |
MCP101-460HI/TO Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. A Bulk package is used to package the power management. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. A supply voltage of 4.35V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Through Hole is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MCP101, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP101-460HI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101-460HI/TO Applications
There are a lot of Microchip Technology MCP101-460HI/TO Voltage Supervisors applications.
- Fire equipment power monitoring system
- Network equipment
- Important electronics for automotive protection
- Military electronics
- Power communication system
- emergency room
- Leakage protection
- Cloud computing
- Kitchen appliances
- Electronics installed in the vehicle
