MCP101-485DI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 4.6V |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.725V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.85V |
| Threshold Voltage | +4.73V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.85V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP101-485DI/TO Overview
As you can see, this power management is mounted through 3 terminals. Packaged in a Bulk-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management conducts in a 4.6V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. Power managment ic pin count is 3. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 60μA supply current present in the power management. You can always use MCP101, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
MCP101-485DI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101-485DI/TO Applications
There are a lot of Microchip Technology MCP101-485DI/TO Voltage Supervisors applications.
- Electronics installed in the vehicle
- Network equipment
- Medical-specific insulation monitor
- Important electronics for automotive safety
- Household appliances
- Unattended substation automation
- Computer applications
- Radar
- Fire equipment power monitoring system
- Power distribution systems of operating room
