MCP101T-300I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.85V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height | 950μm |
| Length | 2.9mm |
| Width | 1.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP101T-300I/TT Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.85V volt supply. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management system has 3 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 60μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MCP101, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP101T-300I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101T-300I/TT Applications
There are a lot of Microchip Technology MCP101T-300I/TT Voltage Supervisors applications.
- DC stabilized power supply module
- Smart meter
- Power distribution systems of operating room
- Urban rail transit weak current power monitoring
- Rechargeable batteries
- Network equipment
- Smartphones
- Important electronics for automotive safety
- Important electronics for automotive protection
- Electrical fire monitoring system
