MCP101T-315I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP101T-315I/TT Overview
A total of 3 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 3V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 3. 3 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 60μA. It is always advisable to use MCP101, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 60μA can be used.
MCP101T-315I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101T-315I/TT Applications
There are a lot of Microchip Technology MCP101T-315I/TT Voltage Supervisors applications.
- Embedded computing
- Consumer electronics
- Functional modules
- WiFi router
- Computer applications
- Military communications
- Radio
- Smart meter
- Analog circuit
- Satellite navigation
