MCP101T-460I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.35V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP101 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.475V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.48V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.6V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP101T-460I/TT Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 4.35V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. 3 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 60μA. To find similar IC managements from the manufacturer, you can always search by MCP101. A maximum supply temperature of 60μA can be used.
MCP101T-460I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP101T-460I/TT Applications
There are a lot of Microchip Technology MCP101T-460I/TT Voltage Supervisors applications.
- Power distribution systems of ICU
- Efficient information transmission
- Leakage protection
- Cloud computing
- Satellite navigation
- Unattended substation automation
- Radio
- Important electronics for automotive protection
- Smart meter
- Radar
