MCP102-195I/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP102 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 1.872V |
| Max Reset Threshold Voltage | 1.929V |
| Threshold Voltage | +1.9V |
| Undervoltage Threshold | 1.872V |
| Overvoltage Threshold | 1.929V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP102-195I/TO Overview
This power management consists of 3 mounting terminals on which it can be mounted. Power management is packaged in a Bulk way. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 1-voltage supply. Through Hole mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 3 pins on IC management. Pin count of the power management is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Through Hole mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 1.75μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP102, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.
MCP102-195I/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP102-195I/TO Applications
There are a lot of Microchip Technology MCP102-195I/TO Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Computer applications
- Smartphones
- Power communication system
- Data storage applications
- Battery cars
- Network equipment
- Multi-voltage system
- DVR
- Low voltage/high power - AI, GPU
