MCP102T-195I/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP102 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 1.872V |
| Max Reset Threshold Voltage | 1.929V |
| Threshold Voltage | +1.9V |
| Undervoltage Threshold | 1.872V |
| Overvoltage Threshold | 1.929V |
| Length | 2.025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP102T-195I/LB Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. Power managment ic pin count is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 1.75μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP102, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
MCP102T-195I/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP102T-195I/LB Applications
There are a lot of Microchip Technology MCP102T-195I/LB Voltage Supervisors applications.
- Household appliances
- Display equipment
- Consumer electronics
- Kitchen appliances
- Rechargeable batteries
- Embedded computing
- DVR
- Data storage applications
- Electronics installed in the vehicle
- Digitally controlled LDO regulators circuit
