MCP102T-315E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Supplier Device Package | SOT-23-3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MCP102 |
| Output | Push-Pull, Totem Pole |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 3.034V |
| Max Reset Threshold Voltage | 3.126V |
| Undervoltage Threshold | 3.034V |
| Overvoltage Threshold | 3.126V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP102T-315E/TT Overview
Power management is packaged in a Tape & Reel (TR) way. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 1.75μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP102, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.
MCP102T-315E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP102T-315E/TT Applications
There are a lot of Microchip Technology MCP102T-315E/TT Voltage Supervisors applications.
- Fire equipment power monitoring system
- Data storage applications
- Dash board
- Unattended substation automation
- Power distribution systems of ICU
- Computer applications
- Stable power system
- DVR
- Power distribution systems of infant care room
- Multi-voltage system
