MCP103T-300E/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP103 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 2.866V |
| Max Reset Threshold Voltage | 2.974V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.866V |
| Overvoltage Threshold | 2.974V |
| Length | 2.025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP103T-300E/LB Overview
A total of 3 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 1.75μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MCP103, the base PMIC number. A maximum supply temperature of 1.75μA can be used.
MCP103T-300E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP103T-300E/LB Applications
There are a lot of Microchip Technology MCP103T-300E/LB Voltage Supervisors applications.
- Important electronics for automotive safety
- Battery cars
- Refrigeration
- Unattended substation automation
- Urban rail transit weak current power monitoring
- Stable power system
- Household appliances
- Solar power charger
- Network equipment
- Kitchen appliances
