MCP103T-300E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP103 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 2.866V |
| Max Reset Threshold Voltage | 2.974V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.866V |
| Overvoltage Threshold | 2.974V |
| Length | 2.92mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP103T-300E/TT Overview
A total of 3 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. 3 pins are present in total in this power management. 3 pins make up the power management. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 1.75μA. For similar manage ics search of the manufacturer, you can always refer to MCP103, the base PMIC number. A maximum supply temperature of 1.75μA can be used with this power management.
MCP103T-300E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP103T-300E/TT Applications
There are a lot of Microchip Technology MCP103T-300E/TT Voltage Supervisors applications.
- Consumer electronics
- Magnetic resonance imaging
- emergency room
- Battery cars
- Data storage applications
- Cloud computing
- DC stabilized power supply module
- Set top box
- Important electronics for automotive safety
- Multi-voltage system
