MCP103T-315E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP103 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 3.034V |
| Max Reset Threshold Voltage | 3.126V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.034V |
| Overvoltage Threshold | 3.126V |
| Height | 1.02mm |
| Length | 3.05mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP103T-315E/TT Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 3. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 1.75μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP103, which is the base power ics number. The maximum supply temperature is 1.75μA.
MCP103T-315E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP103T-315E/TT Applications
There are a lot of Microchip Technology MCP103T-315E/TT Voltage Supervisors applications.
- Battery cars
- Detection of phase loss
- Low voltage/high power - AI, GPU
- Electrical fire monitoring system
- Computer applications
- Battery cars
- Personal computers
- Dash board
- Multi-voltage system
- Utility meter
