banner_page

MCP111-290E/TO

3 Terminals 3-Pin MCP111 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP111-290E/TO
  • Package: TO-226-3, TO-92-3 (TO-226AA)
  • Datasheet: PDF
  • Stock: 509
  • Description: 3 Terminals 3-Pin MCP111 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-226-3, TO-92-3 (TO-226AA)
Number of Pins 3
Operating Temperature -40°C~125°C TA
Packaging Bulk
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
Termination SMD/SMT
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Terminal Position BOTTOM
Terminal Form WIRE
Number of Functions 1
Base Part Number MCP111
Output Open Drain or Open Collector
Pin Count 3
Max Output Current 10mA
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 1.75μA
Nominal Supply Current 1μA
Max Supply Current 1.75μA
Adjustable Threshold NO
Quiescent Current 1μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.9V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.857V
Max Reset Threshold Voltage 2.944V
Threshold Voltage +2.9V
Undervoltage Threshold 2.857V
Overvoltage Threshold 2.944V
Height 4.953mm
Length 4.9276mm
Width 3.937mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP111-290E/TO Overview


A total of 3 terminals are used to mount this power management. Bulk-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 3. Pin count of the power management is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 1.75μA, this PMIC is capable of fully function as specified. You can always use MCP111, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

MCP111-290E/TO Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-290E/TO Applications


There are a lot of Microchip Technology MCP111-290E/TO Voltage Supervisors applications.

  • FPGA design
  • Important electronics for automotive protection
  • Power distribution systems of CCU
  • Military communications
  • Power distribution systems of operating room
  • Rechargeable batteries
  • Linux and server computing
  • WiFi router
  • Utility meter
  • Transformer load monitoring equipment

Write a review

Note: HTML is not translated!
    Bad           Good