MCP111T-195I/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP111 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 1.872V |
| Max Reset Threshold Voltage | 1.929V |
| Threshold Voltage | +1.9V |
| Undervoltage Threshold | 1.872V |
| Overvoltage Threshold | 1.929V |
| Length | 2.025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP111T-195I/LB Overview
Power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 3. Power managment ic pin count is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 1.75μA supply current present in the power management. It is always advisable to use MCP111, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 1.75μA.
MCP111T-195I/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-195I/LB Applications
There are a lot of Microchip Technology MCP111T-195I/LB Voltage Supervisors applications.
- Important electronics for automotive safety
- Rechargeable batteries
- Military communications
- Dash board
- Battery cars
- Battery cars
- Personal computers
- Power distribution systems of CCU
- Electronics installed in the vehicle
- Linux and server computing
