Parameters |
Overvoltage Threshold |
1.929V |
Length |
2.92mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.96mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP111 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Output Type |
Voltage |
Max Output Current |
10mA |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
1.75μA |
Max Supply Current |
1.75μA |
Adjustable Threshold |
NO |
Quiescent Current |
1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.9V |
Number of Voltages Monitored |
1 |
Min Reset Threshold Voltage |
1.872V |
Max Reset Threshold Voltage |
1.929V |
Threshold Voltage |
+1.9V |
Undervoltage Threshold |
1.872V |
MCP111T-195I/TT Overview
A total of 3 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 1.75μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP111, which is the base power ics number. Voltage supervisor can work with a supply temperature of 1.75μA at the most.
MCP111T-195I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-195I/TT Applications
There are a lot of Microchip Technology MCP111T-195I/TT Voltage Supervisors applications.
- Analog circuit
- Power distribution systems of CCU
- Military communications
- Transformer load monitoring equipment
- DC stabilized power supply module
- Network equipment
- Power distribution systems of operating room
- Multi-voltage system
- Embedded computing
- Dash board