MCP111T-270E/LB
| Parameters | |
|---|---|
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.591V |
| Max Reset Threshold Voltage | 2.67V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.591V |
| Overvoltage Threshold | 2.67V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP111 |
MCP111T-270E/LB Overview
A total of 3 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SC-70, SOT-323 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 3 pins on IC management. This power management has 3 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 1.75μA. To find similar IC managements from the manufacturer, you can always search by MCP111. The maximum supply temperature that PMIC chip can work with is 1.75μA.
MCP111T-270E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-270E/LB Applications
There are a lot of Microchip Technology MCP111T-270E/LB Voltage Supervisors applications.
- Embedded computing
- Detection of phase loss
- Radar
- DVR
- Radio
- Digitally controlled LDO regulators circuit
- External alarm
- Utility meter
- Medical-specific isolation transformer
- Insulation fault location system
